1. Check your symptoms sound a Beep Code.Every time you turn on the machine first. I can hear a Peep in a short time and then the machine will work normally. But when you hear the sound or noise over a long time, then the machine stops. I still maintain that your machine has a problem. When you see these symptoms, immediately shut down immediately. Because as long as the machine has not yet been resolved. I can not use the machine until the problem first. Peep the sound we hear is called Beep Code, which is many times unequal. I have a long and noisy. The sounds are different this time tell us that. Equipment does not have a problem. So, if this problem is to try as many times as well as short-term kind. Then compared in a North London based brand of BIOS. To know what the cause. I have to find a solution to the.
2. Check the condition of the machine by the prompts on the screen. Report any problems or anomalies detected by the on-screen message. We called the Message Error given notice another problem that is useful. It has allowed us to identify problems as soon as the equipment is not malfunctioning. Do not know if it works any part of the problem. This will lead to a simple way to solve common problems. Examples of messages that appear on the screen as often. CMOS checksum Error. CMOS BATTERY State Low. HDD Controller Failure.
Diskplay switch not proper. So if you find that you report a problem to find a way to fix it immediately. But if you can not fix it, he shall record a message on the screen. The question for those who can make a suggestion or a repair shop as a mechanic look at it. To repair faster.
3. Check it by looking at the symptoms of the disorder can be observed.
This would require the skills, knowledge and expertise than the first two because it is a symptom that the machine does not have anything let me know how much equipment you have problems or damage. A disorder in which we can observe physical, such as the switch, then power it up, plug in the machine is turned on immediately, turn the machine was less than 5 minutes, it crashes, so you can see signs of this. I do not have to know the symptoms that we recognize it. So to solve this type of work is needed who is experienced or skilled technicians. The collection will be able to analyze the test. And repair problems.
4. Check the symptoms that we can identify the device at all.
This is a problem with the equipment we're using a lot, but if it does not work. Or perform poorly. I knew immediately that something such as a CD-ROM drive does not work. Screen flicker or flash drive, etc. A CD will not see it as a problem caused by a malfunction of the device directly to the audit or inspection is easy. Not as complicated as three of the past.
5. Check the condition of the equipment upgrade. To adjust the machine.
What makes the problem one is to further modify or customize some devices that make sure the problem is the same, such as upgrading the RAM, the machine hangs Overclock CPU to burn, the BOIS and the volume of the will. on the condition that before any work is also lot. But after the upgrade or tweak it a problem immediately. Then you have to do ????? Events have an answer for you.
